Monday, January 26, 2015

ONE FOR ALL URC3021 UNIVERSAL REMOTE PROGRAMMING AND CODE LIST FOR DVD PLAYERS

 

                               CODE LIST FOR DVD PLAYERS 

The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box. To control devices other than the default brands, perform the following steps; otherwise skip this section:

HOW TO PROGRAM 
1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc)

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.
On the remote control, press a device key once (i.e., DVD/VCR, CBL/SAT, or TV).

NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCRonce. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCRonce. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SATonce.

3. Press and hold SET until the LED (red light) blinks twice, then release SET

4. Use the Manufacturer’s Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LEDdid not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For next code.

NOTE: If the device does not have a POWER key, press PLAY

6. Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code in the following CODE LIST

SETUP COD FOR DVD

Apex Digital 0672, 0717, 0794, 1056, 0755,
0797, 1100, 0796, 1061
Axion 1072
Blaupunkt 0717
Blue Parade 0571
CineVision 0876
Curtis Mathes 1087
CyberHome 1024, 1023, 0816
Daewoo 0784
Denon 0490
Dual 1068
DVD2000 0521
Emerson 0591, 0675
Enterprise 0591
Fisher 0670
Funai 0675
GE 0522, 0815, 0717
Go Video 0744, 0715, 0783
GPX 0699
Greenhill 0717
Hitachi 0573
Hiteker 0672
JVC 0558, 0623
Kenwood 0490, 0534
KLH 0717, 1020
Koss 0651
Lasonic 0798
Magnavox 0503, 0675
Marantz 0539
Microsoft 0522
Mintek 0839, 0717
Mitsubishi 0521, 1521
Nesa 0717
Norcent 1003
Onkyo 0503
Oritron 0651
Panasonic 0490, 1762
Philips 0503, 0539, 0646
Pioneer 0525, 0571
Polk Audio 0539
Proscan 0522
Qwestar 0651
RCA 0522, 0571, 0717
Rotel 0623
Rowa 0823
Samsung 0573, 1075, 0820
Sanyo 0670
Shinsonic 0533, 0839
Sony 0533, 1533, 0864, 1033
Sylvania 0675
Symphonic 0675
Technics 0490
Theta Digital 0571
Toshiba 0503
Tredex 0799
Urban Concepts 0503
Xbox 0522
Yamaha 0490, 0539, 0545
Zenith 0503, 0591