SONY HBD-E780W - E980W - E985W BLU RAY PLAYER SERVICE MODE FRONT PANEL CIRCUIT

SONY HBD-E780W - E980W - E985W

BLU RAY PLAYER SERVICE MODE FRONT PANEL CIRCUIT

SERVICE MODE
Setting method of the BD service mode:
1. Connect this unit with TV monitor.
2. Press the [POWER] button to turn the power on.
3. Press button in order of the [DISPLAY]
[0] [2] [1] [SUBTITLE] on the remote commander. (Make the interval when each button is pressed within two seconds)
4. Enter the BD service mode. The OSD menu on TV monitor can be operated by remote commander.
1. Main Functions
• Diag
Performs unit test of devices installed on the board.
• Display Error Log
Error log is displayed. Displayed contents can also be saved in an USB memory device.
• Factory Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version Up Not used.
• System Information
Displays the system information of the unit.
Displays information such as the software version, drive information, etc.
• EMC Test Mode Not used.
• Drive
Write drive OP data and check drive.
2. Menu Tree
3. Service Mode Menu (Top Menu)
This is the top menu of service mode.
Each function is accessed from this screen.
Operation:
[1] Moves to Diag screen
[2] Moves to Log screen
[3] Moves to Factory Initialize screen
[4] Moves to Network screen
[5] Moves to Version Up (DISC version update) screen (Not used)
[6] Moves to System Information screen
[7] Moves to EMC test mode screen (Not used)
[8] Moves to Drive screen
[9] Moves to HDD mode (Not used)
[UP]/[DOWN] Moves the cursor [ ENTER] Moves to the screen of the item selected with the cursor.

4. Diag (Device Test)
This screen is used to test devices mounted on the board.
Screen 1: Selects the test category
Operation:
[LEFT]/[RIGHT,] Selects the category
[UP]/[ ENETR] Moves to the selected category
[RETURN] Returns to the service top menu
Screen 2: Device test
Selects the device to test after selecting Device Test in screen 1.
Operation:
[LEFT]/[RIGHT] Selects the device to test
[ ENTER] Executes the test
[UP] Returns to selection of test category
[RETURN] Returns to selection of test category
• List of test categories
Device Test
Video Test
Audio Test
Audio Input Test
Wireless LAN Test (not used)
Mic Test (not used)
HDMI Input Test
Transcoder Test (not used)
• Device Test: List of devices
USB Host : USB media check (front and rear). Only one time.
D/A Converter : DAC write check (non-verif cation).
Ifcon : Not used in this unit.
MIC : Not used in this unit.
MFI : MFI read/write Check
IPC : Device ID check
External HDMI : Revision check
Transcorder : Not used

5. Diag (Video/Audio Test)
This screen performs video and audio tests.
Screen 1: When video test category is selected
Operation:
[ENTER ] Shows/hides the color bar
[UP]/[RETURN] Returns to the selection of test category
Screen 2: When audio test category is selected
Operation:
[ ENTER] Plays back/stops the tone sound
[UP]/[RETURN] Returns to the selection of test category
6. Diag (Audio Input Test)
This screen performs audio input test.
Screen 1: Select Audio Input Test Category
Operation:
[LEFT]/[RIGHT] Selects the category
[DOWN]/[ENTER ] Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device
After “Audio Input Test” selects in Screen 1, the device to test is chosen.
Operation:
[UP]/[DOWN] Selects Device
[ENTER ] Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
• Device Test : Device List
Digital Input1 : CXD9998 is inputted from ARC
Digital Input2 : CXD9998 is inputted from Optical
Analog Input : CXD9998 is inputted from AUDIO
7. Diag (Wireless LAN Test) (HBD-E780W/E980W only)
8. Diag (MIC Input Test)
This screen performs MIC input test.
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
This screen performs HDMI input test.
Screen 1: Select HDMI Input Test Category
Operation:
[LEFT]/[RIGHT] Selects the category
[DOWN ]/[ ENTER] Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device After “HDMI Input Test” selects in Screen 1, the device to test is chosen.
Operation:
[UP]/[DOWN] Selects Device
[ ENTER] Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
10. Diag (Transcoder Test)
Note: Not used for the servicing
11. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[ ENTER] Moves to the Error Log output screen
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[LEFT] Returns to the previous page
[RIGHT] Moves to the next page
[RETURN] Returns to the screen (Screen 1) that selects the log type
[RED] Writes the log contents to an USB memory device
12. Factory Initialize (Factory Settings)
13. Network (Network Test Diagnosis Screen: Ifconf g)
Network menu for the wired ethernet.
Screen 1: Ifconf g Test
Operation:
[ ENTER] Activate Ifconf g (Display network setting)
[RIGHT] Select ping test
[RETURN] Returns to the top menu of the service mode
Screen 2: Ping Test
Operation:
[LEFT] Select Ifconf g test
[RETURN] Returns to the top menu of the service mode
(The details of aPing test are “14. Network (Network Test Diagnosis Screen: Ping)”)
14. Network (Network Test Diagnosis Screen: Ping)
Ping test for the wired ethernet.
Screen 1: Ping Test
Operation:
[LEFT] Select Ifconf g test
[DOWN] Ping execution preparation
[RETURN] Returns to the top menu of the service mode
Screen 2: The IP address of the Ping point is set up
(IP address input mode)
When “Ping to :>” is reversed, the [ ] button is pressed and IP is inputted.
Operation:
[ ENTER] Finish to input
[RETURN] Finish to input
[LEFT] Finish to input and Select Ifconf g Test
[0] to [9] Input Character sting ‘0-9’
[TIME] Input Character sting ‘.’
[CLEAR] Backspace
15. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[RIGHT] Drive information (delta IOP of a drive is measured)
and wireless device information displayed (go to
Screen 2)
[RETURN] Returns to the top menu of the service mode
Screen 2: Drive and Wireless Information Menu
Operation:
[LEFT] Basic Information displayed (go to Screen 1)
[RETURN] Returns to the top menu of the service mode
When delta IOP is measured, it becomes impossible to use the Version Up function.
16. Drive
This menu is used to operate the drive using drive-related diagnostic and tools.
Screen 1: Selecting items under *Drive
Operation:
[LEFT]/[RIGHT] Selects the category
[DOWN]/[ ENTER] Activate the selected category
[RETURN] Returns to the top menu of the service mode
[1] Drive OP data Write
[2] Servo Parameter Check Menu (Not used)
[3] Servo Signal Check Menu (Not used)
[4] S-Curve Check Menu (Not used)
[5] Readability Check Menu (Not used)
[6] OP Position Check Menu (Not used)
[7] OP Check Menu (Not used)
[8] Load Eject Aging (Not used)
[9] Spindle Control Check Menu (Not used)
[10] FA Test Mode (Not used)
Screen 2: To start OP data Write
Operation:
[ ENTER] Starts
Screen 3: Show OP data Write result
Operation:
NG - USB is not f nd
NG - File (Butada.txt) is not f nd
OK - OP data writ

FRONT PANEL (FL)
CLICK ON THE IMAGE TO ZOOM IN