Tuesday, April 07, 2015

SONY KLV-32EX330 SERVICE MODE AND SELF DIAGNOSTIC MENU

SONY KLV-32EX330

LCD TV

SERVICE MODE AND SELF DIAGNOSTIC MENU 

ACCESSING SERVICE MODE
1)Go toTV standby condition by remote commander.
2)Press “i+ (info)”,“5”,“Volume +”then“ TV power” on remote.
3)You can See Service Mode on display.
ACCESSING SOFTWARE VERSION
1)Press (Enter)or button on Remote to enter status information.
ACCESSING SERIAL NUMBER EDIT
1) Press > button on Remote to edit Serial Number.
2) Press UP or DOWN button to select number
The font color of YES is change to black when it is selected.
3) Serial Number can be set ONLY ONCE
After user input data , press<Enter>.
Pop dialog will appear to inform user to confirm data.
Press or button to select YES or NO.
Select YES if input data is correct
Select YES if in put data is correct.
Select NO if input data is incorrect.
Press <Enter> to save answer.
4) If YES is selected, the input data is saved into EEPROM.
SERIAL NUMBER EDIT is grayed out and the serial number that has been input is displayed.
User will not able to edit anymore.
5) If NO is selected, the input data is not saved into EEPROM.
The serial number that has been input is displayed.
User can still edit the Serial Number.
ACCESSING SELF DIAGNOSTIC MENU
1)Go to TV standby condition by remote commander.
2)Press “i+ (info)”,“5”,“Volume-” then “TV power” on remote.
3)To Exit– Press Power Off & On.
SOFTWARE UP DATE
Note:
Software updates can be performed by:
1)System Update through the Internet which available only on Certain LCD models. Please check on i-manual or Operating Instruction whether the
model is available with the system.
OR
2) Please check with Software Upgrade Manual in ORISS Website
3) The software updates may not be ready yet in ORISS Website after the 1st Issue of Service Manual is released.
4) Do check and keep updated with the ORISS Website for any information.