Wednesday, September 16, 2015

EPSON STYLUS PRO 4000 ERROR CODES AND MAINTENANCE MODE

EPSON STYLUS PRO 4000 

ERROR CODES AND MAINTENANCE MODE 

MAINTENANCE ERRORS
MAINTENANCE REQ ­ 0002 ­ 
CR movement cycles has reached predetermined value 
MAINTENANCE REQ ­ 0008 ­ 
RTC backup battery shut off
MAINTENANCE REQ ­ 0040 ­ 
Pump counter has reached predetermined amount.
 MAINTENANCE REQ ­ 0080 ­
 Date is not set 
MAINTENANCE REQ ­ 0088 ­ 
RTC backup battery is not installed.
 MAINTENANCE REQ ­ 0100 ­
 RTC backup battery pressure is temporally low.
MAINTENANCE REQ ­ 0200 ­
 ASF paper feeding has reached predetermined value.
SERVICE ERRORS
SERVICE REQ ­ 00000101 ­ 
CR Motor life
SERVICE REQ ­ 00010000 ­
 PF Motor Encoder check error
SERVICE REQ ­ 00010001 ­
 PF Motor out of step
SERVICE REQ ­ 00010002 ­
 PF Motor over current
SERVICE REQ ­ 00010003 ­
 PF Motor in­position time­out
SERVICE REQ ­ 00010004 ­
 CR Motor Encoder check error
SERVICE REQ ­ 00010005 ­ 
CR Motor out of step
SERVICE REQ ­ 00010006 
 CR Motor over current
SERVICE REQ ­ 00010007 
 CR Motor in­position time­out
SERVICE REQ ­ 00010008 ­
 Servo interrupt watchdog time­out
SERVICE REQ ­ 00010009 ­
 System interrupt watchdog time­out
SERVICE REQ ­ 0001000A ­ 
CR axis detection error
SERVICE REQ ­ 0001000C ­
 PG axis detection error
SERVICE REQ ­ 0001000F ­ 
CR Motor PWM output faulty
SERVICE REQ ­ 00010010 ­ 
PF Motor PWM output faulty
SERVICE REQ ­ 0001001B 
Head driver (TG) temperature error

Maintenance mode 
1. Enters the maintenance mode
Confirm the printer is turned off first. While pressing and holding the Pause button, press the Power button to turn on the printer.
2. Select an item
Press the Paper Feed UP or Paper Feed DOWN button to select a desired item.
3. Set the item
Press the Menu button to enter the selected item. The first parameter is displayed on the LCD.
4. Select a parameter
Press the Paper Feed UP or Paper Feed DOWN button to select a parameter for the item.
5. Set the parameter
Press the Menu button to store the selected parameter. ,If the parameter is for execution only, press the Menu ,button to execute the function for the item.
Note:If second parameter is displayed on the LCD, repeat the steps 4 and 5 to select and set the second parameter.
6. Exit the maintenance mode
Press the Power button to turn off the printer, and turn it on again.