Tuesday, September 29, 2015

PHILIPS IMPACT PLUS VACUUM CLEANER FC8382 DISASSEMBLING AND CIRCUIT

PHILIPS IMPACT PLUS VACUUM CLEANER

FC8382 

DISASSEMBLING AND CIRCUIT 

SERVICE INFORMATION
To open the appliance, first remove the screws A,B,C,D.
To reach the motor remove the screws E.
To disassemble the cordwider use Torx screw driver no T10, which is one of set consisting of T20, T15, T10, T9, T8, T7 and T6 = 4822 395 50145.
Give attention that the contact fi ngers (item 45) are placed on the cord-winder shaft in such a way that the pressure point of the cordwinder knob to the cord winderlever (item 40) is vertical.
The spare parts have been standardized as much as possible.
Component confi guration on exploded view may differ in case of specifi c versions, however, the actual components are distinguished by means of code numbers.
Item 1 Cotton dustbag is used in those countries where paper dustbags are not available
Item 41 Cord-winder spring unit is provided with a long spring, both long and short cords can be used in combination with this spring.
Cordwinder spring has to be tensioned till maximum minus approx. 1,5 revolution.
After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
PRODUCT INFORMATION
Maximum air displacement : 30 l/sec
Maximum vacuum water column : 300 cm
Power consumptio (IEC) 225V : 1200 W
Dust storage capacity : 2 litres
Cord length (depends on version) : 5.3 m
Filter system : 5 fi lters
Dimensions cleaner : 37 x 28 x 23 cm
Weight accessoiries : 4.8 kg
Noise : 80 dB max.
Colour : Mint green
Electronic controled motor rpm
Cordwinder build-in with fl at cord

Dustbag-full indicator in dustcover
EXPLODED VIEW 

CIRCUIT 
CLICK ON THE IMAGES TO ZOOM IN