Monday, October 05, 2015

PHILIPS FC8404 CITY LINE ROMA VACUUM CLEANER DISASSEMBLING

PHILIPS FC8404 CITY LINE ROMA 

VACUUM CLEANER DISASSEMBLING 

DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- To open the appliance, first remove the screws A,B,C,D.
- To reach the motor remove the screws E.
- To disassemble the cordwider use Torx screw driver no T10, which is one of set consisting of : T20, T15, T10, T9, T8, T7 and T6 = 4822 395 50145.
- First remove the two screws B of (item 15) hinge turn + window. Remove (item 15) hinge turn + window from (item)
3) upper housing by means of a flat instrument (e.g. screw driver) as shown (to prevent demage). The hinge turn + window has snaps which fits into the upper housing. Vario / knob turn (item 10 ) can now be separated as shown in next drawing.
- Place the knob turn in line with the adjuster item 10A. Hook (item 15) hinge turn + window into the (item 3) upper housing. Use the 2 screws (item B) to fasten item 15 to item 3. Place the cover of vario / knob turn (item 10) in the correct way; only on one way possible.

TECHNICAL INFORMATION
- Maximum air displacement : 34 l/sec
- Maximum vacuum water column : 280 cm
- Power consumptio (IEC) 225V : 1400 W
- Dust storage capacity : 2 litres
- Cord length (depends on version) : 6 m
- Filter system : 6 filters
- Dimensions cleaner : 37 x 28 x 23 cm
- Weight + accessoiries on board : 4.3 kg
- Noise : 80 dB
- Colour : Apricot gold
REPAIR INSTRUCTION
- Give attention that the contact fingers (item 45) are placed on the cord-winder shaft in such a way that the pressure point of the cordwinder knob to the cord winderlever (item 40) is vertical.
- The spare parts have been standardized as much as possible.
- Component configuration on exploded view may differ in case of specific versions, however, the actual components are distinguished by means of code numbers.
- Item 1 Cotton dustbag is used in those countries where paper dustbags are not available
- Item 41 Cord-winder spring unit is provided with a long spring, both long and short cords can be used in combination with this spring.
- Cordwinder spring has to be tensioned till maximum minus approx. 1,5 revolution.
CIRCUIT 

EXPLODED VIEW

CLICK ON THE IMAGES TO ZOOM IN