Monday, November 16, 2015

PANASONIC DMP-BD35 BLU RAY SERVICE MODE ERROR CODES AND POWER SUPPLY CIRCUIT

PANASONIC DMP-BD35 

BLU RAY 

SERVICE MODE ERROR CODES AND POWER SUPPLY CIRCUIT 

Taking out the Disc from BD Drive Unit when the Disc cannot be ejected by OPEN/CLOSE button
Forcible Disc Eject
When the power can be turned off.
1. Turn off the power and press [PAUSE] and [OPEN/CLOSE] keys on the front panel simultaneously for 5 seconds.
When the power can not be turned off.
1. Press [POWER] key on the front panel for over 10 seconds to turn off the power forcibly, and press [PAUSE] and [OPEN/ CLOSE] keys on the front panel simultaneously for 5 seconds.
When the Forcible Disc Eject can not be done.
1. Turn off the power and pull out AC cord.
2. Remove the Top Case.
3. Insert Eject Pin (JZS0484) into the hole on the bottom of BD Drive and slide the Eject Pin in the direction of the arrow to eject tray slightly.

Self-Diagnosis and Special Mode Setting
Self-Diagnosis Functions
Self-Diagnosis Function provides information for errors to service personnel by
Self-Diagnosis Display when any error has
occurred.
U**, H** and F** are stored in memory and held.
You can check latest error code by transmitting [0] [1] of Remote Controller in Service Mode. Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnosis display is ON.
ERROR CODES AND DESCRIPTION 
Error Code
Diagnosis contents
Description
U30

Remote control code error

Display appears when main unit and remote
controller codes are not matched.
U59









Abnormal inner temperature
detected









Display appears when the drive temperature
exceeds 70°C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are
disabled. (Fan motor operates at the highest
speed for the first 5 minutes. For the remain
ing 25 minutes, fan motor is also stopped.)
The event is saved in memory as well.

U71





HDMI incompatible error
(HDCP incompatible)




Display this error when the equipment (com
patible with DVI such as TV, amplifier etc.)
connected to the unit by HDMI is incompatible
with HDCP.
*HDCP = High-bandwidth Digital Content Protection


U72





HDMI connection error
(communication error)




This error is displayed when there are any
communication problems with the unit and the
equipments (TV, amplifier etc.) connected to
the unit by HDMI. (or when there is a problem
with the HDMI cable)

U73





HDMI connection error
(authentication error)




when authentication error occurs while the
equipments (TV, amplifier etc.) are connected
by HDMI. (or when there is a problem with the
HDMI cable)

F99




Hang-up





Displayed when communication error has
occurred between Main microprocessor and
Timer microprocessor.

H19




Inoperative fan motor




When inoperative fan motor is detected after
powered on, the power is turned off
automatically.
The event is saved in memory.


F00




No error information




Initial setting for error code in memory
(Error code Initialization is possible with error
code initialization and main unit initialization.)


F34




Initialization error



When initialization error is detected after
starting up main microprocessor, the power is
turned off automatically.
The event is saved in memory.

F58
Drive hardware error
When drive unit error is detected, the event is
saved in memory.

Service Mode
Setting every kind of modes for servicing.
When the power is off, press [PAUSE], [PLAY] and [SETUP (Remote Controller)] keys simultaneously for 5 seconds.
Rating password
The audiovisual level setting password is initialized to Level 8.
Open the tray, and press [SKIP REV (Remote Controller)] and [PLAY] simultaneously for 5 seconds.
BD-ROM history cleaning
Persistent Storage of BD-ROM standard is cleaned. Screen display: [The player's history data has been cleared] is displayed for five seconds.
When the power is on, disc is not in tray, press [STOP] and [POWER (Remote Controller)] keys simultaneously for 5 seconds.
Forced disc eject
Removing a disc that cannot be ejected. The tray will open and unit will shift to P-off mode.
While Demonstration Lock is being set, this Forced disc eject function is not accepted.
When the power is off, press [PAUSE] and [OPEN/CLOSE] keys simultaneously for 5 seconds.
Forced power-off
When the power button is not effective while power is ON, turn off the power forcibly.
Press [POWER] key over than 10 seconds.
Progressive initialization
The progressive setting is initialized to Interlace.
When the power is on (SS mode), press [STOP] and [PLAY] simultaneously for 5 seconds.
Default setting
The date of Menu, Mode and EEPROM setting, etc. is set to the default condition in factory
When the power is off, press [PAUSE], [POWER] and [OPEN/ CLOSE] simultaneously for 5 seconds
POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN