Wednesday, November 18, 2015

PHILIPS BDP5012/F7 FIRMWARE UPDATE INITIALIZATION AND POWER SUPPLY

PHILIPS BDP5012/F7 

FIRMWARE UPDATE INITIALIZATION AND POWER SUPPLY  

HOW TO EJECT THE DISC MANUALLY 
1. Remove the Top Cover and Front Assembly.
2. Insert a screwdriver, hexagon wrench to push the Portion A.
3. Pull the tray out manually and remove a disc.


HOW INITIALIZE THE BLU-RAY DISC PLAYER

To put the program back at the factory-default, initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in that order.4. Press [ STOP ] button on the remote control unit.
        CLEAR WILL DISPLAY 
5. To exit this mode, press [ POWER ] button.
FIRMWARE RENEWAL MODE
Note: The file extension of the available firmware is “b20”.
1. Turn the power on and remove the disc on the tray and close the tray.
2. To put the BD player into version up mode, press [9], [8], [7], [6], and [DISC MENU/POP UP MENU] buttons on the remote control unit in that order.
The tray will open automatically.
3. Load the disc for version up.
4. The BD player enters the F/W version up mode automatically. Make sure to insert the proper F/W for the state of this model.
5. After programming is finished, the checksum on the VFD .
6. Unplug the AC cord from the AC outlet. Then plug it again.
7. Turn the power on.
8. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in that order.
9. Press [ STOP ] button on the remote control unit.
10. To exit this mode, press [POWER ] button.
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in that order.
4. To exit this mode, press [ POWER ] button.
HOW TO RENEW THE FIRMWARE
1. Press [HOME] to display Home menu.
2. Select to Settings - Advanced Setup - Others - Software Upgrade.
3. F/W Upgrade  will appear on the screen, then select Yes
4.Insert the disc and press [OPEN/CLOSE].
5. Disc loading starts.
6. UPDATE WILL DISPLAY ON THE SCREEN AND  VFD
7. F/W loading starts
8. Updating starts automatically. Wait until installation complete
9. SHUTDOWN on the VFD and turn the power off automatically when it finishes.
10. The power turns on and the tray will open automatically. Remove the disc on the tray. All the Settings will be kept as they were.
 POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN  
The laser bream is emitted for the location shown in picture. when checking the laser diode , be sure to keep the eyes at least 30 cm away from the pickup lens when the diode is turned on . Do not look directly  at the laser beam.
CAUTION : use of controls and adjustments,or doing procedure other than those specified herein , may result in hazardous radiation exposure.     
 TOP PICTURE OF BD MECHANISM 
CLICK ON THE IMAGE TO ZOOM IN