Friday, November 06, 2015

SONY HCD S500 - HCDS800 ADJUSTMENT MODES POWER SUPPLY CIRCUIT AND AMPLIFIER CIRCUIT

SONY HCD S500 - HCD S800 

DVD HT

ADJUSTMENT MODES POWER SUPPLY CIRCUIT AND AMPLIFIER CIRCUIT 

HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF
When removing the disc tray, high torque is necessary to turn the ejection cam on the bottom surface. Therefore, the screw thread is easily damaged. To prevent this damage, turn it carefully.

VERSION DISPLAY MODE
Procedure:
1. Press the A button on the main unit or POWER  button on the remote commander to turn the set on.
2. Press three buttons of FUNCTION, PREVIOUS/ REV and EJECT simultaneously for two seconds.
3. The message “VER. 1. ** ” is displayed for a moment.
JOG TEST MODE
Procedure:
1. Press the EJECT  button on the main unit or POWER  button on the remote commander to turn the set on.
2. Press three buttons of BAND , STOP and EJECT simultaneously.
3. The fluorescent indicator displays “JOG 0”. The value “JOG 0” increases like +1, +2, +3... if rotating the VOLUME knob clockwisw,or it decreases like –1, –2, –3,.... if rotating counterclockwise.
4. To exit from this mode, press the POWER button to turn the set off
KEY TEST MODE
Procedure:
1. Press the EJECT button on the main unit or POWER  button on the remote commander to turn the set on.
2. Press three buttons of DISPLAY , STOP and EJECT simultaneously.
3. The message “KEY NUM 0” is displayed and “0” blinks. 4. Each time a button is pressed, “KEY NUM 0” value increases. However, once a button is pressed, it is no longer taken into account.
5. When all buttons are pressed, “KEY NUM 11” appears and the number blinking is stopped.
6. To exit from this mode, press the POWER button to turn the set off.
DISPLAY TEST MODE
Procedure:
1. Press the EJECT button on the main unit or POWER  button on the remote commander to turn the set on.
2. Press three buttons of BAND , PAUSE and EJECT simultaneously.
3. All segments are turned on.
4. Press the  NEXT > button
5. Press the NEXT > button, confirm the display.
6. Press the NEXT > button, all segments are turned off.
7. Every pressing of the NEXT > button turns on each segments in the same order.
8. To exit from this mode, press the POWER button to turn the set off.
OSD TEST MODE
Procedure:
1. Press the EJECT button on the main unit or POWER  button on the remote commander to turn the set on.
2. Set the FUNCTION to DVD.
3. While pressing two buttons of DISPLAY and STOP simultaneously, turn the VOLUME knob clockwise.
4. The Test Mode Menu is displayed on the TV screen.
5. To execute each function, select the number on the remote commander.
6. See the following section for explanation in detail.
7. To exit from this mode, press the POWER button to turn the set off.
DISC TRAY LOCK
Procedure:
1. Press the EJECT  button on the main unit or POWER  button on the
remote commander to turn the set on.
2. Press two buttons of DISPLAY and  PREV simultaneously for two seconds.
3. The message “LOCKED” is displayed and the tray is locked. (Even if exiting from this mode, the tray is still locked.)
4. Press two buttons of DISPLAY and  PREV simultaneously for two seconds again.
5. The message “UNLOCKED” is displayed and the tray is unlocked.
6. To exit from this mode, press the POWER button to turn the set off.
STARTING TEST MODE
Set the FUNCTION to DVD with the main unit power on. Next, while pushing the STOP button and the [DISPLAY] button on the main
unit at the same time, turn the VOLUME knob to the right to start Test Mode and display the menu shown below on the TV screen. At the bottom of the menu screen, the model name and revision number are displayed.
To execute each function, select the desired menu and press its number on the remote commander. To exit from Test Mode, press the [POWER] button.
SYSCON DIAGNOSIS
The same contents as board detail check by serial interface can be checked from the remote commander.
On the Test Mode Menu screen, press [0] key on the remote commander, and the following check menu will be displayed
DRIVE AUTO ADJUSTMENT
On the Test Mode Menu screen, press [1] key on the remote commander, and the drive auto adjustment menu will be displayed 
POWER SUPPLY CIRCUIT 

POWER AMPLIFIER CIRCUIT 
CLICK ON THE IMAGES TO ZOOM IN