Category: AV Receiver service and repair
Contents of this article
- Finding the Latest firmware
- Updating the firmware
- Updating the firmware ID
MARANTZ AV7005
Update
to Latest Firmware AV7005
This step shows you how to update your
receiver to latest firmware before starting the upgrade.
Update from the On‐Screen Menu (Press the MENU key on the
RC or on your receiver)
(1) Select ‘Manual Setup’.
(2) Select ‘Option Setup’.
(3) Select ’Firmware Update’.
(4) Select ’Check for Update’ Press Enter.
(5) Your receiver is connecting the server.
(6) Shows if update is available and download time.
(5) Your receiver is connecting the server.
(6) Shows if update is available and download time.
(7) Select ‘Update’ Press Enter.
(8) Select ‘Yes’ Press Enter.
(9) Starting update…The On‐Screen Menu shuts down automatically.
(10) The front display shows updating status.
Your receiver will reboot automatically when finished. Please do not turn off
your receiver during update. Update may take longer than estimated download
time.
Tip
1) With a network connection, a ‘Pop up menu’
will show and indicate that a new firmware is available when powering on. Press
Enter to continue. (Left) Tip
2) If your receiver shows “Latest” in the
update firmware field, then your receiver already has the latest firmware
update. Please proceed from slide 6 to STEP 2 ‘Finding your serial # and MAC
address’. (Right)
The ‘Upgrade ID’ is a unique code for your
receiver and is necessary for your upgrade. This step shows you how to find
your upgrade ID.
Finding
Your Upgrade ID from the On‐Screen Menu (Press the MENU Key on the
RC or on your receiver)
1) Select ‘Manual Setup’.
2) Select ‘Option Setup’.
3) Select ’Add New Feature.
4) Your receiver is connecting the server.
5) Your receiver shows ‘Upgrade ID’
Now you are ready for upgrade registration.
Please visit fill out the following form. You will be notified by email upon
payment, at which time you can proceed to step 4 and follow the instructions to
download your AirPlay upgrade
Upgrading
Your Receiver AV7005
Upgrade
from the On‐Screen Menu (Press the ‘MENU’ key on the
RC and on your receiver)
(1) Select ‘Manual Setup’
(2) Select ‘Option Setup’
(3) Select ‘Add New Feature’.
(4) Your receiver is connecting the server.
(5) Select ‘Upgrade’ Press Enter to start upgrade. The On‐Screen
Menu shuts down automatically.
(6) The front display shows upgrade status. The unit will
reboot automatically after upgrade. Please do not turn off your receiver during
upgrade. Upgrade may take longer than estimated download time.
Tip) With a network connection, a ‘Pop up menu’ will show
and indicate that a new upgrade is available when powering on. Press Enter to
continue.
How to Obtain a Firmware Update and an Upgrade ID (NA7004
and M‐CR603)
The menu systems for the NA7004 and M‐CR603
are identical; the procedure for obtaining the Firmware Update and Upgrade ID
is the same for both. See below.
1. Using the frontpanel buttons or the supplied remote
control; press MENU
2.
Navigate to, and select OTHER
3.
Navigate to, and select FIRMWARE UPDATE. Perform any available update
4.
Navigate to, and select ADD NEW FEATURE. The Upgrade ID is displayed here
