Tuesday, January 12, 2016

ONKYO TX-SR343 – Factory reset – Remote reset – 5 digit Remote codes for Bluray players and programming – Resting the remote

                                                 

ONKYO TX-SR343

Resetting the AVR
Resetting the unit to the status at the time of shipment may solve the problem. If the measures mentioned in the troubleshooting do not solve the problem, reset the unit with the following procedure. If you reset the unit status, your preferences will be reset to the defaults. Note them down before starting reset.
How to reset
1. While holding down CBL/SAT on the main unit (note that step 2 must be performed with this button pressed down)
2. Press ON/STANDBY on the main unit. "Clear" is appeared on the display and the unit will enter standby mode
How to reset the remote controller
1. While holding down RECEIVER on the remote controller (note that step 2 must be performed with this button pressed down)
2. Press and hold Q for 3 or more seconds until the 3 remote indicator stays lit. Within 30 seconds, press RECEIVER again to reset.
Programming Remote Control Codes
Consulting the Remote Control Code List
1. Look up the Remote Control Codes for the corresponding remote control code.
#The following REMOTE MODE buttons are preprogrammed with remote control codes.
BD/DVD: Onkyo Blu-ray Disc/DVD player CD: Onkyo CD player STRM BOX: Apple TV
# Only TV remote control codes can be entered for TV.
# Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD)
2. Press and hold DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to program the remote control code.
The remote indicator lights in the input mode.
3. With the number buttons, enter the 5-digit remote control code within 30 seconds.
# Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again.
Resetting the REMOTE MODE Buttons
You can reset the remote control code registered in the REMOTE MODE button to its default status. This operation can be executed on a single REMOTE MODE button.
1. Press and hold Q for 3 or more seconds while holding down the REMOTE MODE button you want to reset.
# The remote indicator will light.
2. Within 30 seconds, press the REMOTE MODE button again.
# Resetting is complete when the remote indicator flashes twice.
To reset all the remote controller settings 
While holding down RECEIVER, press and hold Q for 3 or more seconds until the remote indicator stays lit. Within 30 seconds, press RECEIVER again. Resetting is complete when the remote indicator flashes twice.
5 DIGIT CODE LIST FOR BLU RAY PLAYERS 
Anthem 32820
Anthem Statement 32820
Cambridge Audio 32808
Denon 32258, 32748, 33851
Electrocompaniet 32545
Elite 32854
Funai 30675
Harman/Kardon 33228, 32927
Insignia 32596, 32428, 30675
Integra 32147, 32900, 32910, 33100, 33101, 33500, 33501
JVC 32365, 32612, 32855
Lexicon 32545
LG 31602, 32811, 30741
Magnavox 30675
Marantz 32414, 33444
Mitsubishi Electric 34004
Onkyo 32147, 32900, 33101, 33501, 32910, 33100, 33500
Oppo 32545
Panasonic 31641, 33862, 33580, 33641, 32859, 32523, 32710
Philips 32789, 32434, 32084
Pioneer 32442, 32847, 32854, 30142
RCA 32532
Samsung 30199, 33195
Sharp 32250, 33313
Sherwood 32820, 33837
Sony 31516, 32180, 30772
Sylvania 30675
Tascam 34004
Toshiba 32705, 33157, 33857, 32551
VIZIO 32563
Yamaha 32298, 33871, 33837