PHILIPS HTS3051B-F7 - HTS3051B-F7 Blu ray Home theatre - Factory rest - Firmware Update - Firmware renewal - Power supply board schematic diagram - SSC6200 - KA7500B-C - Bluray Home theatre Repair and Service - Manual Service

Category: Blu Ray player Repair and Service 

Contents of this article 

  • Factory reset (Initialization)
  • Firmware renewal 
  • Power supply circuit 

PHILIPS HTS3051B-F7 - HTS3051B-F7

HOW TO INITIALIZE THE BLU-RAY DISC HOME THEATRE
HTS3251B/F7 Initialization
To put the program back at the factory-default, initialize the BD player as the following procedure.
Note: By initializing, network is reset to disconnected state and “Network Service Disclaimer” appears on the screen.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in that order. 
4. Press [ STOP ] button on the remote control unit.
5. To exit this mode, press [ POWER ] button.
HTS3051B/F7 initialization
To put the program back at the factory-default, initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in that order.
4. Press [ STOP ] button on the remote control unit.
5. To exit this mode, press [ POWER ] button.
FIRMWARE RENEWAL MODE
Note: The file extension of the available firmware is “b30”.
1. Turn the power on and remove the disc on the tray and close the tray.
2. To put the BD player into version up mode, press
[9], [8], [7], [6], and [DISC MENU/POP-UP MENU] buttons on the remote control unit in that order. The tray will open automatically.
3. Load the disc for version up.
4. The BD player enters the F/W version up mode automatically.
5. After programming is finished, the checksum on the VFD
6. Unplug the AC cord from the AC outlet. Then plug it again.
7. Turn the power on.
Note: All the settings will be put back to factory default.
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [INFO] buttons on the remote control unit in that order.
4. To exit this mode, press [ POWER ] button.
FIRMWARE RENEWAL MODE FOR USER 
1. Press [HOME ] button to display Setup menu.
2. Select Settings - Advanced Setup - Others - Software Upgrade - Disc Upgrade.
3. Select “Yes” and the tray opens. Insert the disc and press [ EJECT] button.
4. Disc loading starts.
6. Firmware loading starts.
7. Updating starts automatically
8. “GOODBYE” on the VFD and power turns off automatically when it finishes.
9. The power turns on and the tray will open automatically. Remove the disc on the tray.
Note: The setup setting configured before the update will be kept.
INTERNET RADIO ERROR CODE
HTS3251B/F7
Error Code appears in the error screen when the unit detects an error,. The code is used to specifically determine the cause of error.
Summary Error Code
Summary Error Code
Error message
01
LAN feature is invalid.
02
Playback Error
03
Connection Error
POWER SUPPLY BOARD SCHEMATIC DIGRAM 
USING SSC6200 - KA7500B-C
CLICK ON THE IMAGE TO ZOOM IN