Saturday, May 14, 2016

Blackberry Curve 8310 – Disassembling procedure – How to remove the case – How to remove the keyboard – How to remove the mother board

Category: Laptop Repair and Servcie 

Contents of this article 

  • How to remove the case
  • How to remove the keyboard
  • How to remove the mother board 

Blackberry Curve 8310

DISASSEMBLING PROCEDURE 
Press down on the battery release button and slide the back cover up with your thumb.
Pry from the top of the battery to pull it out.
Slide the metal sim card cover to the unlock position. Remove the sim card. The arrows on the sim card enclosure indicate the lock and unlock positions.

Remove the two T5 Torx screws circled at the top of the phone. The T5 Torx screws may be covered by a white sticker.
Remove the red cover at the bottom of the phone. You may have to work a spudger underneath to release the plastic clips.
Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.
Use a spudger to pry the front cover away from the side panels. Work the spudger around the entire phone until the front cover is free.
Remove the keyboard. Remove the four T6 Torx screws located on the corners of the keyboard frame.
Now remove the left and right side panels.
Remove the keyboard frame. Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture. Now remove the screen housing.
Unplug the ribbon cable from the board. The ribbon cable is located at the top left of the phone above the screen. Insert tool between LCD screen and board. Pry LCD screen from board.
Separate the motherboard from the back case.