Friday, June 17, 2016

LG-P970 – Disassembling procedure – How to replace the touch screen – Mobiles and Smartphones repair and Service

Category: Mobiles and Smartphones Repair and Service 

Contents of this article 

  • How to remove the case 
  • How to remove the Connections 
  • How to replace the touch screen 


Remove the back cover
Remove the battery
Remove the SIM card
Remove the µSD card (Memory)
Remove 7 screws on the back
With a tool start to open the back frame
And it's now easy to remove the back frame with hand, carefully.
Remove buttons
Locate the back camera
With a tool raise up the led.carefully
With a tool disconnect the back camera
And remove the camera with your fingers.
Don’t forget to remove the little connector of screen, with a tool, right next to the empty slot of the camera.
It's time to remove carefully the tactile screen.
Don’t scratch le LCD.
The touch panel is glued with double-sided tape. You can remove it with your fingers.
Careful with the touch screen connector. cut new double sided tape (1-2mm width), put it on the edges and peel it.
Remove the inside protection on the new touch screen. carefully put the news touch screen on the LG. Take care that the connector goes right through the right hole.
To finish, add all part by reading these instructions in reverse ;-)