Tuesday, November 01, 2016

Alcatel OneTouch Evolve – Disassembling procedure – How to replace the volume button – Mobiles and smartphones repair and service

Category: Mobiles and SmartPhones Repair and Service 

Contents of this article 

  • How to remove the case
  • How to remove the mother board 
  • How to replace the Volume button 

Alcatel OneTouch Evolve

This will be an opening with enough space to insert the flat head of the plastic opening tool. it will be located on the bottom right of the phone
Rotate the pry tool 90 degrees until the panel lifts up.
With your thumb nail, lift the rest of the panel up around the perimeter of the phone.
This is the battery for the Alcatel   One Touch Evolve. Look for this component when the back panel has been removed.
Place finger in the tab on the top right corner of the battery indicated by a black arrow. With slight pressure, push battery down and out of the slot until the battery is removed
There will be eight 4.5mm screws that fit your Phillips head PH00 screwdriver notated by the red circles in the image.
Unscrew each screw, counter clockwise (left), until each one has been removed.
If necessary, use tweezers to fully remove the screws from the device. Remove battery before lifting off the panel.
Access the small pry tool in the tool kit
Place flat head in the crease between the phone and panel where the matte finish meets the shiny finish of the front of the phone.
Rotate the pry tool 90 degrees until part of the panel lifts up
All areas need to be fully risen off before the panel can be removed.
Do not use the opening tool to pry open the device near the power button or near the volume button.
This will be located in the top right of the back side of the secondary panel and will be clear in color.
Using the smaller pry tool, place the flat head on the area of the button exposed to the exterior, and push with slight pressure until the button is inside the secondary panel.
Using the tweezers, lift the clear rubber extensions of the volume buttons out of their tabs located inside the secondary panel.