Saturday, January 21, 2017

Marantz Bluray Player – Marantz BD7004 – Service mode – How to initialize the player – Firmware update procedure

Entering Service Mode
In power on condition, no discs and tray close, it will be entered into service mode by the following operation using the remote controller. However, it will not be entered when Media Select Item is SD Memory.
Service Mode using remote controller
Press the following buttons on the remote controller in power on condition, no discs and tray close;
[2] > [5] > [8] > [0] > [CLEAR]
Release from Service Mode
Press the [POWER OFF] button to turn off power.
HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default, initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order.
4. Press [ STOP ] button on the remote control unit.
5. To exit this mode, press [POWER OFF] button.
FIRMWARE UPDATE PROCEDURE 
1. Turn the power on and remove the disc on the tray and close the tray.
2. To put the BD player into version up mode, press [9], [8], [7], [6], and [POP UP MENU/MENU] buttons on the remote control unit in that order.
The tray will open automatically.
3. Load the disc with new version.
4. The BD player enters the F/W version up mode automatically.
5. After Update,checksum on the VFD will displayed.
6. Unplug the AC cord from the AC outlet. Then plug it again.
7. Turn the power on.
8. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order.
9. Press [ STOP ] button on the remote control unit and verify the firmware version
10. To exit this mode, press [POWER OFF] button.
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order.

4. Press [ STOP ] button on the remote control unit and verify the firmware version
5. To exit this mode, press [POWER OFF] button.
TRAY LOCK MODE
Enter this mode using the following procedure.
1. Confirm that the TV Monitor is connected.
2. With playback stopped, press [SETUP], [TOP MENU], [3], [AUDIO], [0] and [SETUP] buttons on the remote control unit in that order. "Trade-On" appears in the upper right corner on the screen.
3. To exit this mode, press [SETUP], [TOP MENU], [3], [AUDIO], [0] and [SETUP] buttons on the remote control unit in that order. "Trade-Off" appears in the upper right corner on the screen.