Friday, January 06, 2017

ONN - ONA16AV010 - Universal Remote – Programming procedure – Code list for HDTV and DTV

Direct Code setup
1. Locate the Remote Code.
2. Manually turn on the device you wish to control.
3. Press and hold the SETUP button until the red indicator light stays on (approximately 2 seconds) and then release the SETUP button.
4. Press and release the desired device button on the remote (TV, CBL/SAT). The red indicator will blink once and then remain on.
5. Enter the first 4-digit code previously found in the code list using the number buttons on the remote. If the code entered is a valid code, the red indicator light will turn off. If the code entered is not a valid code, the red indicator light will flash and remain on allowing you to re-enter the code.
Note: If no buttons are pressed for 35 seconds, the remote will exit the SETUP mode and you will have to start over.
6. Point the remote at the device. Press the POWER button - if the device turns off, no further programming is required for that device. If the device does not turn off, return to step 3 and use the next code found in the code list. Continue this process until a code for your device is found.
Programming Notes# If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code
Search method to program your remote.
# Sometimes the first code that “works” with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
# You can use any device button to control other devices in your home entertainment system. For example, you can use the CBL/SAT device button to control an audio receiver.
# Write down the code found to operate your device for future reference.
Auto Code Search
The Auto Code Search searches automatically through all of the codes stored in this remote. Read all the following steps prior to starting the auto search as you will need to be prepared to lock in the proper code when found.
1. Manually turn on the device you wish to control.
2. Press and hold the SETUP button until the red indicator light stays on (approximately 4 seconds) and then release the button.
3. Press and release the desired device button on the remote (TV, CBL/SAT). The red indicator will blink once and then remain on.
4. Point the remote at the device and press and release the POWER button to start the search. The red indicator will flash (approximately every 2 seconds) as the remote searches.
NOTE: The remote must be pointed at the device for the duration of this search.
5. Place your finger on the #1 button so you are prepared to lock-in the code.
6. When the device shuts off or begins playing, press the #1 button to lock-in the code. The red indicator light will turn off. 

NOTE: You have approximately two seconds after the device shuts off or begins playing to lock in the code.
7. Point the remote at the device and check to see if the remote operates the device as desired. If it does, no further programming is required for that device. If it does not, return to step 2 and start the auto search.
Programming Notes# This process may take several minutes as the remote contains many codes.
# The SETUP button can be used during the search process to reverse the direction of the search of the remote codes. For example, if you miss the code for your device and the remote is continuing to search (as indicated by the blinking red light), press the SETUP button and the code search will reverse direction and return to the code.
# When using the Auto Code Search programming method, the device button corresponding to the type of device you want to control must be selected (for example, the TV device button must be selected in step 3 if you want to control a TV.
# Sometimes the first code that “works” with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Continue the code search as directed above until the best code is found.

HDTV Set Top Boxes
Apex 2911
Charter 0174, 1523
Directv Models 0703,0983, 1443, 1513, 1533
GE HDSTB 0874
Go Video Hdt 100 2631
Hitachi 61hdx98b 1103, 2661
Hughes Hird E8 0303 ,1103, 1153, 2591, 2651, 2661
Hughes Htl HD 0303,1103, 1153, 2591, 2651, 2661
Insignia 2921
KWorld SA290QE 2931
LG HTL HD 0303,1103, 1153, 2591, 2651, 2661
LG LSS 3200a 0303,1103, 1153, 2591, 2651, 2661
Mitsubishi SRHD 400 1103, 2661
Mitsubishi SRHD 500 1103, 2661
Mitsubishi SR HD5 1103, 2661
Motorola HDT100 2601
Motorola HRT100 2601
Philco TB100HH9 2941
Philips DSHD800R 1103, 2661
Pioneer SH-D505 2561
Proscan PSHD105 0803, 2581
RCA DTA800B1 2951
RCA DTC-100 0803, 2581
RCA DTC-210 0803, 2581
RCA HD65W20 2611
RCA PSHD105 0803, 2581
Samsung SIR-T165 1143, 2671
Samsung SIR-T351 1143, 2671
Samsung SIR-TS1601123, 2621
Samsung SIR-TS360 1123, 2621
Sony SATHD100 2681
Sony SATHD200 2681
Sony SATHD300 2681
Sylvania 6900DTD 2641, 2941
Toshiba DST 3100 0303, 1153, 2591, 2651
Toshiba DW65x91 0303, 1153, 2591, 2651
Toshiba DST 3000 0303, 1153, 2591
Venturer 1164
Zenith DTV1080 1173, 2571
Zenith HDSTAT420 1173, 2571
Zenith HDSTAT520 1173, 2571
DTV
Access HD 1234
Airlink101 1174
Alpha Digital 1234
Amtc 1234
Apex 1114
Artec 1224
Cadence 1214
Channel Master 1204
Coship 1214
Digitalstream 1194
Dish Network 0073
Echostar 0073
GE 0874
Goodmind 0874
Gridlink 1144
iNet Access 1234
Insignia 1184
Kingbox 1224
Lasonic1144
Magnavox 2941
Microgem 1154
Philco 2941
RCA 1083
Sansonic 1144
Skardin 1174
Sunkey 1134
Tivax 1234
Venturer 1164
Winegard 1164
Zenith 1184
Zentech 1174
Zinwell 1124