Friday, January 13, 2017

Philips Home theater system - Philips HTS3565D - HTS3566D – Reset procedure – Region code setting – Power supply circuit USING KA7500 - UC3842

System Reset
a) Press “OPTIONS“ button on R/C,TV will show setup menu.
b) Select the menu using the DOWN ARROW and on RIGHT ARROW R/C.
c) Go preference page to do system reset.
Region Code Change
a) In open model,press”9” “9“ “9“ “9“ on R/C,then input desired number to change region code :
1 USA
2 EU
3 AP
4 Australia ,NZ , Latam
5 INDIA ,Russia
6 CHINA
Version Control Change
a) In open model, press “1“ “5“ “9“ on R/C
b) Press “ok” button to confirm
c) TV will show message as below:

Password Change
a) Press “OPTIONS “ button on R/C,TV will show setup menu
b) Select the menu using the DOWN ARROW and RIGHT ARROW on R/C
c) Go preference page select “password“ to change
* 000000 is default password supplied.
Check on the Software Version
a) Open the CD Door
b) Press “INFO“ button on R/C
c) TV will show the version on screen
Trade model
a) Press “Open/Close “ button on R/C
b) Press “2” “5” “9” on R/C,VFD will display “TRA ON “ or “TRA OFF“
Upgrading new firmware
a) Copy “software files” into a CD-R disc
b) Open the CD Door,then insert CD-R program disc
c) Close the CD Door
d) VFD will show:
“Loading“
“Erase” -- erase the memory
“Writing” about 1 minute
“done “
* The system will switch off and on again automatically.
e) Upgrade OSD will show:

f) Select “OK”, Upgrading OSD will show:
POWER SUPPLY CIRCUIT 
USING KA7500 - UC3842
CLICK ON THE IMAGE TO ZOOM IN