SONY KLV-32R407A, KLV-40R457A KLV-46R472A
SERVICE MODE ENTRY
Accessing Service Mode
1) Go to TV standby condition by remote commander.
2) Press “i+ (info)”, “5”, “Volume +” then “TV power” on remote.
3) You can see Service Mode on display.
1) Go to TV standby condition by remote commander.
2) Press “i+ (info)”, “5”, “Volume +” then “TV power” on remote.
3) You can see Service Mode on display.
Accessing Software Version
1) Press (Enter) or button on Remote to enter status information.
1) Press (Enter) or button on Remote to enter status information.
2) Press (Enter) button on Remote to back to Service Mode.
Accessing Self Diagnostic History
1) Press (Enter) button on Remote to enter Self Check Mode.
1) Press (Enter) button on Remote to enter Self Check Mode.
2) Press Enter button on Remote to back to Service Mode
Accessing Self Diagnostic Menu
1) Go to TV standby condition by remote commander
1) Go to TV standby condition by remote commander
2) Press “i+ (info)”, “5”, “Volume -” then “TV
power” on remote.
3) To exit Press power off & on.
power” on remote.
3) To exit Press power off & on.
Accessing Serial Number Edit
1) Press button on Remote to edit Serial Number.
2) Press UP or DOWN button to select number.
The font color of YES is change to black when it is selected.
3) Serial Number can be set ONLY ONCE.
After user input data , press <Enter>.
Pop dialog will appear to inform user to confirm data.
Press LEFT or RIGHT button to select YES or NO.
Select YES if input data is correct.
Select NO if input data is incorrect.
Press <Enter> to save answer.
Note: * The font color of YES is change to black when it is
selected.
4) If YES is selected, the input data is saved into EEPROM.
SERIAL NUMBER EDIT is grayed out and the serial number that
has been input is displayed.
User will not able to edit anymore.
5) If NO is selected, the input data is not saved into
EEPROM.
The serial number that has been input is displayed.
User can still edit the Serial Number.
Note : * The font color of NO is change to black when it is selected.
Note : * The font color of SERIAL NUMBER is white after NO
is selected.
Accessing Model Name Edit
1) Press button on Remote to edit Model Name.
2) Press or button on Remote to select character.
3) Model Name can be set ONLY ONCE.
After user input data , press <Enter>.
Pop dialog will appear to inform user to confirm data.
Press LEFT or RIGHT button to select YES or NO.
Select YES if input data is correct.
Select NO if input data is incorrect.
Press <Enter> to save answer.
Note :* The font color of YES is change to black when it is
selected.
4) If YES is selected, the input data is saved into EEPROM.
Model Name EDIT is grayed out and the model name that has
been input is displayed
User will not able to edit anymore
Note : *The font color of MODEL NAME is change to orange after
YES is selected.
5) If NO is selected, the input data is not saved into
EEPROM.
The model name that has been input is displayed.
User can still edit the Model Name.
Updating the software (For
Asia Region Only)Note:
Software updates can be performed by:
1)System Update through the Internet which available only on Certain LCD models. Please check on i-manual or Operating Instruction whether the model is available with the system
OR
2) Please check with Software Upgrade Manual in Service Website
3) The software updates may not be ready yet in the Website after the 1st Issue of Service Manual is released.
4) Do check and keep updated with the Service Website for any information and/or listed issues that are software related to avoid any discrepancy.
User Name and Password required to access to Service Website please check with Service Headquarters
