SANYO BLU RAY
|
SANYO LCD-32K20
SERVICE MODE AND POWER SUPPLY CIRCUIT
On-screen Service Menu System
How to enter the Service Menu
1. Press MENU button on SIDE controls, MENU will display. 2. Press and hold MENU button on SIDE controls and press “1” button on remote controls. SERVICE MENU will display.
How to enter the Service Menu
1. Press MENU button on SIDE controls, MENU will display. 2. Press and hold MENU button on SIDE controls and press “1” button on remote controls. SERVICE MENU will display.
How to select the service section and service item and change
data value:
To select service section: Press the Cursor ▲ or ▼ button on the remote control hand set, and press the Cursor ◄ or ► button to enter the SUB menu.
To change data value: Select service item by pressing the Cursor ▲or ▼ button , and change data value by pressing the Cursor ◄ or ► button.
To select service section: Press the Cursor ▲ or ▼ button on the remote control hand set, and press the Cursor ◄ or ► button to enter the SUB menu.
To change data value: Select service item by pressing the Cursor ▲or ▼ button , and change data value by pressing the Cursor ◄ or ► button.
Exit from the service menu
Press the MENU button repeatedly or turn off the TV set by pressing the POWER ON/OFF button.
Press the MENU button repeatedly or turn off the TV set by pressing the POWER ON/OFF button.
White Balance Adjustment
How to adjust White Balance Adjustment
1. Input a white pattern(80%) to the composite input terminal.
2. Set the television to following conditions:
Picture mode: standard
Colour temperature: normal
Pre-heading time: more than 10 minutes
3. Enter the service menu, and select WHITE BALANCE with ▲ or ▼ key. Press ◄► to enter the White Balance Adjustment , press corresponding number key to adjust R,G,B.
3. After adjustment, confirm white balance again by normal picture.
How to adjust White Balance Adjustment
1. Input a white pattern(80%) to the composite input terminal.
2. Set the television to following conditions:
Picture mode: standard
Colour temperature: normal
Pre-heading time: more than 10 minutes
3. Enter the service menu, and select WHITE BALANCE with ▲ or ▼ key. Press ◄► to enter the White Balance Adjustment , press corresponding number key to adjust R,G,B.
3. After adjustment, confirm white balance again by normal picture.
POWER SUPPLY CIRCUIT
CLICK ON THE IMAGE TO ZOOM IN
