AKAI LTC 32R5X3HCM
SOFTWARE UPGRADE
ATV SOFTWARE UPGRADE
A.Install software.
1.Copy folder of MSTAR ISP Tool(V4.xxx) to PC. mAdvice to English WINDOWS XP.
2.Install MSTAR Driver from folder FTC100103 (MSTAR Driver). commonly,Install automatically after it connect the Update Adaptor Board to PC.You operate by cue.It will install total 3 SYS type drive files.
B.Update
1.Turn off the TV
2.Conect the Update Adaptor Board to VGA socket
of TV and PC.
1.Copy folder of MSTAR ISP Tool(V4.xxx) to PC. mAdvice to English WINDOWS XP.
2.Install MSTAR Driver from folder FTC100103 (MSTAR Driver). commonly,Install automatically after it connect the Update Adaptor Board to PC.You operate by cue.It will install total 3 SYS type drive files.
B.Update
1.Turn off the TV
2.Conect the Update Adaptor Board to VGA socket
of TV and PC.
3.Run software of
ISP_Tool V4.xxx.exe.
4.Turn on the TV.Wait Connecting communications, muntil it display "Device Type....".
5.When if it can't diplay frondose type device, you can turn off the TV,then turn on the TV again.Or press connect item on top of software menu mfo r connecting communication again.
4.Turn on the TV.Wait Connecting communications, muntil it display "Device Type....".
5.When if it can't diplay frondose type device, you can turn off the TV,then turn on the TV again.Or press connect item on top of software menu mfo r connecting communication again.
6.Press to confirm Read item on top of
software menu.
7.Press to confirm Read item, select updating fils.
8.Press to confirm AUTO item on top of
software mmenu.
9.Change the selected option item as the same as this picture.
10.Press Run item,start updating.
11. Finish updating until it display PASS.
Warning: don't turn off the TV in Updating!
Note:This software need restoration after update.
Warning: don't turn off the TV in Updating!
Note:This software need restoration after update.
DVB-T SOFTWARE UPGRADE
1.Delete all files in USB,and Copy update file
of "zr39 160.img” into USB,but you don't rename the file.
2.Turn off the TV.
3.Connect USB Jack to CN21 Jack of Main board.
2.Turn off the TV.
3.Connect USB Jack to CN21 Jack of Main board.
4.Turn on the TV, then select INPUT into DVB-T
if input isn't DVB-T state.
5.DVB-T is Loading.
6. Build update.
7.Update is finished after DVB-T automatically run newly.
Warning: don't turn off the TV while it is Updating!
Note:This software need restoration after update.
Warning: don't turn off the TV while it is Updating!
Note:This software need restoration after update.
DVD SOFTWARE UPGRADE
1.Del all files in USB.
2.Copy update files into USB,the file name must be MTK.BIN.If it isn't this file name, this file name must be rename to MTK.BIN.
3.Turn on the TV Combo,select working in DVD input,and take out all disc and take out all USB and take out all CARD.
4.Insert USB with update file,select reading USB.
5.After it read update file,it have prompt on TV Combo,then you must operate according to prompt.If it is automatically Updatting,please can't do any operation,If it have cue that you press play key to continue update,please press play button on R/H to update.
6.You can't do any operation while updatting,until TV-Combo restart DVD working screen, Update is finished,then you take out USB.
Warnning:you can't do any operation while updatting,and it can't quit DVD working! If update is discontinuuty,DVD will not work.
Note:This software need restoration after update.
2.Copy update files into USB,the file name must be MTK.BIN.If it isn't this file name, this file name must be rename to MTK.BIN.
3.Turn on the TV Combo,select working in DVD input,and take out all disc and take out all USB and take out all CARD.
4.Insert USB with update file,select reading USB.
5.After it read update file,it have prompt on TV Combo,then you must operate according to prompt.If it is automatically Updatting,please can't do any operation,If it have cue that you press play key to continue update,please press play button on R/H to update.
6.You can't do any operation while updatting,until TV-Combo restart DVD working screen, Update is finished,then you take out USB.
Warnning:you can't do any operation while updatting,and it can't quit DVD working! If update is discontinuuty,DVD will not work.
Note:This software need restoration after update.
ATV(9E19)
A.SOFTWARE DATA'S RESTORATION
1.Enter system setting item of MUNE.
2.Select memory recall item,press right button for default setting.
1.Enter system setting item of MUNE.
2.Select memory recall item,press right button for default setting.
B.SOFTWARE DATA'S ADJUSTMENT
1.press MENU button,then input 1234 numbers to enter factory menu by RH.
1.press MENU button,then input 1234 numbers to enter factory menu by RH.
2.press to select
into factory reset item by RH,and press right button,get back all inner data to
default data,adjustment's data isn't reserved.Press Menu button again to exit
factory menu.
3.press to select other item,the press right button,it can enter this item data adjustment state. There may be adjustment data
3.press to select other item,the press right button,it can enter this item data adjustment state. There may be adjustment data
DEFAULT VALUE ADJ
You press MENU button to exit factory menu by RH,and data is automatically saved.When if select into Factory Reset item,then press right button,it get back inner data into default data, and manual adjustment data isn't saved.
Note:don't optionally adjust default data,TV can't work if data is error.
You press MENU button to exit factory menu by RH,and data is automatically saved.When if select into Factory Reset item,then press right button,it get back inner data into default data, and manual adjustment data isn't saved.
Note:don't optionally adjust default data,TV can't work if data is error.
DVB-T(ZR39160)
1.Enter DVB-T menu,select system setting item,then press OK button enter setting.
2.Select factory default item,press OK button to enter it,then select Restor to Default item,press OK button enter setting.
3.Press OK button enter Restor.
1.Enter DVB-T menu,select system setting item,then press OK button enter setting.
2.Select factory default item,press OK button to enter it,then select Restor to Default item,press OK button enter setting.
3.Press OK button enter Restor.
DVD(MTK1389L)
1.Select DVD of INPUT.
2.Press DVD setup to enter DVD setup menu.
3.Select Preference Page,then select Default,then press OK button to reset.
2.Press DVD setup to enter DVD setup menu.
3.Select Preference Page,then select Default,then press OK button to reset.
MST9E19A SCHEMATIC
CLICK ON THE IMAGE TO ZOOM IN
|
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
LCD - LED – PLASMA AND CRT
|
LCD - LED – PLASMA AND CRT
| |
