PHILIPS BDP2180/12/05/X78
FACTORY RESET SOFTWARE UPGRADE TROUBLE SHOOTING AND POWER SUPPLY CIRCUIT
Software Upgrade
Preparation to Software Upgrade
1. Procedure for software upgrade
a) Upgrade from USB:
1)Go to Philips web support to check if the latest software version is available for this player.
2)Build UPG_ALL file in USB
3)Copy the upgrade file to USB UPG_ALL folder.
4)Then insert USB ,start up DUT enter into HOME screen ,select Setup >>Advance>> software update >>USB.
5)When upgrade file detected, select "Yes" to upgrade, select "No" to cancel.
6)Once you start upgrade, please don’t power off the DUT, after upgrade DUT will restart up later a moment time.
Preparation to Software Upgrade
1. Procedure for software upgrade
a) Upgrade from USB:
1)Go to Philips web support to check if the latest software version is available for this player.
2)Build UPG_ALL file in USB
3)Copy the upgrade file to USB UPG_ALL folder.
4)Then insert USB ,start up DUT enter into HOME screen ,select Setup >>Advance>> software update >>USB.
5)When upgrade file detected, select "Yes" to upgrade, select "No" to cancel.
6)Once you start upgrade, please don’t power off the DUT, after upgrade DUT will restart up later a moment time.
b)
Upgrade software via network:
1) 1) Setup the network connection.
2) start up DUT enter into HOME screen ,select Setup >>Advance>> software update >>Network
* You are prompted to start upgrading processes if upgrade media is detected.
3) Follow the instructions on the TV screen to confirm update operation.
4) When upgrade file download completed, select "Start" to upgrade.
5) Once you start upgrade, please don’t power off the DUT, after upgrade DUT will restart up later a moment time.
1) 1) Setup the network connection.
2) start up DUT enter into HOME screen ,select Setup >>Advance>> software update >>Network
* You are prompted to start upgrading processes if upgrade media is detected.
3) Follow the instructions on the TV screen to confirm update operation.
4) When upgrade file download completed, select "Start" to upgrade.
5) Once you start upgrade, please don’t power off the DUT, after upgrade DUT will restart up later a moment time.
2. Check the version information after upgraded.
Wake up DUT, select Setup >>Advance>>version information .
Wake up DUT, select Setup >>Advance>>version information .
Factory Reset Steps
Press"Home" button on remote control‐‐‐>Press"0""3""5""8".
Press"Home" button on remote control‐‐‐>Press"0""3""5""8".
Select Restore‐‐‐>Press"OK"
on remote control
No display on LED,
and buttons do not work
Check every supply voltage on PSU, main board and front
board is normal
Check whether every pin of XP1 on PSU board connects well to
main board ,XP3 connects well to front board
1. Check whether any bad component or soldering exists on
PSU board, main board and front board
2. Check whether the circuit connected to the keys is broken. Replace the LED light , or the whole LED board.
2. Check whether the circuit connected to the keys is broken. Replace the LED light , or the whole LED board.
No audio output (
only for BDP2130 )
Check if the voltage on R52 and CE204 is norma.
Check if the RCA socket is OK
Check if any bad component or soldering exists around DRV632
(U13) on main board
Try to fix the issue by replacing DRV632 (U13)
Replace main board.
Cannot control by
remote control
Check whether the remote control works well.
Check whether every pin of XP1 on PSU board connects well to
main board, especially the 3th and 4th pin, and XP3 connects well to front board.
Check if any bad component or soldering exists around XP1
,XP3 and IR1 on front board.
Replace IR1 on front board
Can’t read disc or
can’t open the disk door
Check whether load motor runs well.
Check whether 45pin and 8pin cable from main board connection
to the loader is normal.
Check if any bad component or soldering exists around U409
and XP7, including the bottom layer
Try to replace loader or update software to fix the issue.
Replace U409, XP7 or main board.
No video display
Check weather the HDMI cable has connect to the screen.
Check if the HDMI JACK is bro
Replace the main board
Cannot connect to network by LAN socket
Check whether the twisted pair has connect to Intern
Check if the LAN socket and U12 is broken.
Check if the soldering and components around LAN socket and
U12 is OK
Replace the main board.
Cannot connect to network by wifi
Check whether USB401 on main board connects well to wifi
model
Check if wifi circuit is OK, especially the 4th PIN in USB401.
Replace the main board
POWER SUPPLY CIRCUIT
CLICK ON THE IMAGE TO ZOOM IN
