PHILIPS HTS5131
BLU RAY HT
SOFTWARE UPGRADE
PROCEDURE TO RESTORE THE SETTING
POWER SUPPLY CIRCUIT
Restore
factory setting
a) Press <Home> button on R/C.
b) Select <Setup>, then press “OK” button on R/C.
c) Select <Advanced>, then press < OK > button on R/C.
d) Select <Restore default settings>,then press <OK> to confirm.
a) Press <Home> button on R/C.
b) Select <Setup>, then press “OK” button on R/C.
c) Select <Advanced>, then press < OK > button on R/C.
d) Select <Restore default settings>,then press <OK> to confirm.
Password
change
a) Press <Home> button on R/C.
b) Select <Setup>, then press “OK” button on R/C.
c) Select <Preference>, then press <OK> button on R/C.
d) Select <Change Password> <Confirm>, then press <OK> button on R/C.
“0000” is default password supplied.
a) Press <Home> button on R/C.
b) Select <Setup>, then press “OK” button on R/C.
c) Select <Preference>, then press <OK> button on R/C.
d) Select <Change Password> <Confirm>, then press <OK> button on R/C.
“0000” is default password supplied.
Trade
mode
a) In open model,press <Home> button on R/C.
b) Press “2” “5” “9” on R/C,VFD will display “TRA ON” or “TRA OFF”
a) In open model,press <Home> button on R/C.
b) Press “2” “5” “9” on R/C,VFD will display “TRA ON” or “TRA OFF”
Check
software version
a) Press “ ” <Home> button on R/C
b) Select <Setup>, then press <OK> button on R/C.
c) Select <Advanced> <Version Info.>,then press <OK> button on R/C
a) Press “ ” <Home> button on R/C
b) Select <Setup>, then press <OK> button on R/C.
c) Select <Advanced> <Version Info.>,then press <OK> button on R/C
d) TV will show message
e) Select <Close> on the version display
screen and press <OK> button to exit .
Upgrading
new software
Method 1: Update software from a USB storage device
a) Create a folder named “UPG_ALL” in your USB storage device,
and Copy the latest upgrading software into the folder.
b) Connect the USB storage device to the home theater.
c) Press “ ” <Home> button on R/C, and select <Setup>.
d) Select <Advanced> <Software Update> <USB>.
e) TV will show message
Method 1: Update software from a USB storage device
a) Create a folder named “UPG_ALL” in your USB storage device,
and Copy the latest upgrading software into the folder.
b) Connect the USB storage device to the home theater.
c) Press “ ” <Home> button on R/C, and select <Setup>.
d) Select <Advanced> <Software Update> <USB>.
e) TV will show message
f) Select <Start>, press <OK>
button on R/C.
g)The set will shut down automatically when
the software upgrade is completed.
Method 2: Update software from the internet
Note: To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site, and for BD-Live application and software update, make sure that the network router has access to the Internet and the firewall is disabled.
a) The “LAN” jack at the back panel of the set must be connect to the network router via network cable and the set connect to TV, Prepare the connection
Method 2: Update software from the internet
Note: To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site, and for BD-Live application and software update, make sure that the network router has access to the Internet and the firewall is disabled.
a) The “LAN” jack at the back panel of the set must be connect to the network router via network cable and the set connect to TV, Prepare the connection
b) Press “ ” <Home> button on R/C, and
select <Setup>.
c) Select <Advance Setup> <Software Update> <Network>.
d) TV will show message.
c) Select <Advance Setup> <Software Update> <Network>.
d) TV will show message.
e) Select <Start>, press <OK>
button on R/C.
f) The set will shut down automatically when
the software upgrade is completed.
OSD
Language setup (only for 51 version)
a) Press “ ” <Home> button on R/C.
b) Select <Setup>, then press “OK” button on R/C.
c) Select <Preference>, then press <OK> button on R/C.
d) Select <Menu language>, then press <OK> button on R/C.
C) Select <English>, then press <OK> button on R/C.
a) Press “ ” <Home> button on R/C.
b) Select <Setup>, then press “OK” button on R/C.
c) Select <Preference>, then press <OK> button on R/C.
d) Select <Menu language>, then press <OK> button on R/C.
C) Select <English>, then press <OK> button on R/C.
POWER SUPPLY CIRCUIT
CLICK ON THE IMAGE TO ZOOM IN
