Category: Mobile and Smartphone Repair and Service
Contents of this article
- How to remove the Display unit
- How to remove the frond camera
- How to remove Power and volume button
LG G3 D851
DISASSEMBLING PROCEDURE
Insert the plastic opening tool or spudger in the notch that
is located on the side of the LG handset. Carefully work your way around the
entire smartphone, gently freeing the locking clips.
You can now remove the battery door/cover from the LG G3.
Next, utilize the plastic opening tool or spudger to pry the battery up and out of its secured location.
You can now remove the battery door/cover from the LG G3.
Next, utilize the plastic opening tool or spudger to pry the battery up and out of its secured location.
How to remove Loudspeaker
Locate and remove the thirteen small Phillips screws (#00)
that secure the rear housing/frame and loudspeaker to the smartphone (marked
with orange circles).
Then slide the SIM and Micro-SD cards out of their trays (marked with an orange arrow).
Then slide the SIM and Micro-SD cards out of their trays (marked with an orange arrow).
Insert the plastic opening tool in the seam of the smartphone
to create separation between the loudspeaker and the phone. You can now
carefully remove the loudspeaker from
the LG G3.
the LG G3.
Next, use the pry tool or spudger to separate the rear housing/frame
from the smartphone’s display assembly. Work your way around the perimeter of
the handset until all of the clips have been released and the rear
housing/frame is removed from the G3.
How to remove Power & Volume Buttons
Utilize the heat gun or a blow dryer to soften the adhesive
securing the power and volume button assembly to the rear housing/frame.
Now, use the fine-tip curved tweezers to gently pry the power and volume button assembly up from the adhesive and remove it from the LG handset.
Now, use the fine-tip curved tweezers to gently pry the power and volume button assembly up from the adhesive and remove it from the LG handset.
How to remove Motherboard
Locate the four wafer connections (marked with orange
rectangles). Use the fine-tip curved tweezers to release the connections from
their sockets.
You can now carefully maneuver the motherboard out of the LG G3.
You can now carefully maneuver the motherboard out of the LG G3.
How to remove Front-Facing Camera
The front-facing camera is located in the top corner of the
LG G3. Use the fine-tip curved tweezers to lift the camera out of its housing
and remove it from the LG handset.
The rear-facing camera is located toward the top of the handset
and is secured in place with a small amount of adhesive.
Utilize the heat gun or a blow dryer to soften the adhesive, and then use the
fine-tip curved tweezers to lift the camera out of its housing and remove it
from the G3.
How to remove Earpiece Speaker
Use the fine-tip curved tweezers to lift up and remove he
earpiece speaker from the LG G3.
How to remove Vibrator
Use the fine-tip curved tweezers to lift up and remove the
vibrator from the LG G3.
How to remove Headphone Jack
Use the fine-tip curved tweezers to lift/pry up the headphone
jack from its housing and remove it from the LG smartphone.
How to remove Display Assembly (LCD & Touch Screen
Digitizer)
The LCD & touch screen/front panel on the LG G3 are fused
together and cannot be separated from the frame/bezel of the smartphone without
the use of heat and patience. Separating the display assembly from the frame is
only recommended if the G3 has a CRACKED or DAMAGED screen that
needs to be replaced.
Use the heat gun or a blow drier to soften the adhesive securing the display assembly to the frame/bezel of the LG G3.
To separate the display assembly from the frame/front housing, utilize one of the screwdrivers, and through the front-facing camera hole carefully push the damaged display assembly away from the LG G3’s frame.
You can now use the plastic opening tool or nylon spudger to continue working around the entire G3 display assembly slowly separating it from the frame/front housing.
Use the heat gun or a blow drier to soften the adhesive securing the display assembly to the frame/bezel of the LG G3.
To separate the display assembly from the frame/front housing, utilize one of the screwdrivers, and through the front-facing camera hole carefully push the damaged display assembly away from the LG G3’s frame.
You can now use the plastic opening tool or nylon spudger to continue working around the entire G3 display assembly slowly separating it from the frame/front housing.
