SONY KDL-40W4730 - KDL-46W4730 - KDL-52W4730
LCD TV
SERVICE MODE AND POWER SUPPLY CIRCUIT
How to
enter the Service Mode
Service adjustments to this model can be
performed using the supplied Remote Commander RM-ED011
1. Turn on the power to the TV set and enter
into the stand-by mode.
2. Press the following sequence of buttons on the Remote Commander
2. Press the following sequence of buttons on the Remote Commander
INFORMATION
i > 5 > VALUME + POWER ON
3. Move to the corresponding adjustment item
using the UP or DOWN arrow buttons on the Remote Commander.
4. Press the RIGHT arrow button to enter into the required menu item.
5. Adjust the data value using the UP or DOWN arrow buttons on on the Remote Commander.
6. To go back at any time press the ‘Return’ button on the Remote Commander.
7. Press the ‘Menu’ button on the Remote Commander to quit the Service Mode when all adjustments have been completed.
4. Press the RIGHT arrow button to enter into the required menu item.
5. Adjust the data value using the UP or DOWN arrow buttons on on the Remote Commander.
6. To go back at any time press the ‘Return’ button on the Remote Commander.
7. Press the ‘Menu’ button on the Remote Commander to quit the Service Mode when all adjustments have been completed.
To place the Remote Commander in ‘Service
Mode’ press the following buttons together for two seconds.
INFORMATION > 5 > VOLAUME
To use the Remote Commander in ‘Service Mode’
press the rewind button on the Remote Commander twice.
TT will then appear in the bottom right hand
corner of the TV.
To take the Remote Commander out of ‘Service
Mode’ press the same buttons above together again for two seconds or remove the
batteries from the Remote Commander.
After carrying out the service adjustments, to prevent the customer accessing the ‘Service Menu’ switch the TV set OFF and then ON again.
After carrying out the service adjustments, to prevent the customer accessing the ‘Service Menu’ switch the TV set OFF and then ON again.
Product Version
1. The following menu appears on the screen
when you enter the ‘Product Version’ menu.
POWER SUPPLY CIRCUIT DIAGRAM
CLICK ON THE IMAGES TO ZOOM IN
