FUNAI LDD-A2006
20" LCD TV/DVD
SERVICE MODE AND POWER SUPPLY CIRCUIT
How to Set up the Service mode
1. Turn the power on. (Use main power on the TV unit.)
2. Press [STANDBY], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
- To cancel the service mode, press [STANDBY] button on the remote control.
1. Turn the power on. (Use main power on the TV unit.)
2. Press [STANDBY], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
- To cancel the service mode, press [STANDBY] button on the remote control.
Flicker Adjustment
1. Enter the Service mode.
1. Enter the Service mode.
2. Press [2]
button on the remote control unit
3.If Flicker
Adjustment is not fit, the screen becomes the following.
4. Press [CH. UP /
DOWN] buttons on the remote control unit so that flash stops.
INITIALIZE THE LCD TV
1. Turn the power
on. (Use main power on the TV unit.)
2. To enter the service mode, press [STANDBY], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
- To cancel the service mode, press [STANDBY] button on the remote control.
3. To initialize the LCD television, press “DISPLAY” button on the remote control unit.
4. Confirm "FF" indication on the upper right of the screen.
2. To enter the service mode, press [STANDBY], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
- To cancel the service mode, press [STANDBY] button on the remote control.
3. To initialize the LCD television, press “DISPLAY” button on the remote control unit.
4. Confirm "FF" indication on the upper right of the screen.
POWER
SUPPLY
CLICK ON THE IMAGE TO ZOOM IN
