SONY KLV-22BX350
LCD TV
LED BLINKING ERROR AND SERVICE MODE
LED Error Display
The Number of
Standby LED (RED blinking) |
Detection Items
|
Board Error Item
|
Monitoring Items
|
Content
|
2
|
Main Power Error
|
Power Board Error(G*)
|
REG12V_MON
|
Reg12Vfailed
|
3
|
Audio Error
|
B* board Error
|
X_AUDIO_MON
|
Audio failure
|
5
|
T-con Error
|
T-con Board Error
|
TCON E_ RR
|
T- CON failed
|
Panel ID NVM Error
|
PanelI2C ACK
|
Panel ID NVM Failed
|
||
6
|
Backlight Error
|
Inverter Board Error
|
BL_ERR
|
Back light Error
|
-
|
B*board Error
|
RTC 12CACK
|
RTC IC Failed
|
SERVICE MODE
Accessing Service Mode
1) Goto TV standby condition by remote commander.
2) Press“i+ (info)”,“5”,“Volume+”then “TV power” on remote.
3) You can see Service Mode on display
1) Goto TV standby condition by remote commander.
2) Press“i+ (info)”,“5”,“Volume+”then “TV power” on remote.
3) You can see Service Mode on display
Updating the software
Note:
Software updates can be performed by:
1)System Update through the Internet which available only on Certain LCD models. Please check oni-manual or Operating Instruction whether the model is available with the system.
OR
2) Please check with Software Upgrade Manual in ORISS Website) for the procedure and when it is require for the software updating.
3) The software updates may not be ready yet in ORISS Website after the 1st Issue of Service Manual is released.
Note:
Software updates can be performed by:
1)System Update through the Internet which available only on Certain LCD models. Please check oni-manual or Operating Instruction whether the model is available with the system.
OR
2) Please check with Software Upgrade Manual in ORISS Website) for the procedure and when it is require for the software updating.
3) The software updates may not be ready yet in ORISS Website after the 1st Issue of Service Manual is released.
4) Do check and keep updated with the ORISS Website
for any information and/or listed issues that are software related to avoid any
discrepancy.
