RCA RCRN06GR CODE LIST FOR BLU RAY AND UNIVERSAL REMOTE PROGRAMMING

RCA RCRN06GR 

CODE LIST FOR BLU RAY AND UNIVERSAL REMOTE PROGRAMMING 

Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method.
TIPS: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT-CBL-DTC for satellite receivers, digital TV converters, or cable boxes, DVD for DVD players, DVR-AUX1 for DVRs, AUDIO for audio receivers, and VCR-AUX2 for VCRs. To program the DVR-AUX1 or VCR-AUX2 keys for a different type of device, see the Reassigning the DVR-AUX1 or VCR-AUX2 key section. To control combo devices, like TV/DVDs and TV/VCRs, you need to program each key separately. Each key will control that part of the combo device.
1. Manually turn on the device you want to control.
2. Find the Code List that came with the remote. Locate the section for the type of device you’re trying to program, and find your brand in that section. Circle the codes for your brand and keep them handy.
3. Press and hold the device key you want to program (the POWER key comes on). While you’re holding down the device key, use your other hand enter the first five-digit code for your brand in the code list (the POWER key goes off after the first digit)
4. When you’ve finished entering the five-digit code, keep holding down the device key and look at the POWER key.
Is the POWER key illuminated?
YES: You’re done! You’ve programmed this device key.
NO, it blinked four times and turned off: You have either entered a code number that is not in the code lists or missed a step in the code entry procedure. Try step 3 again.
Auto Code Search
The Auto Code Search goes automatically through all the codes for the device you’re trying to control. When you find the one that operates your device, you can stop the search and store that code.
TIPS: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT-CBL-DTC for satellite receivers, digital TV converters, or cable boxes, DVD for DVD players, DVR-AUX1 for DVRs, AUDIO for audio receivers, and VCR-AUX2 for VCRs. To program the DVR-AUX1 or VCR-AUX2 keys for a different type of device, see the Reassigning the DVR-AUX1 or VCR-AUX2 key section. To control combo devices, like TV/DVDs and TV/VCRs, you need to program each key separately. Each key will control that part of the combo device. If the original remote control that came with your device has separate ON and OFF keys (instead of a single POWER key), the Auto Code Search might not work with that device. Try the Direct Code Entry method described later in this manual. To exit without saving a new code at any point in the Auto Code Search, press the EXIT key.
1. Manually turn on the device you want to control.
2. Press and hold the device key you want to program (the POWER key illuminates). While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time (the POWER key turns off).
3. Wait until the POWER key comes on and stays on. Then release both keys.
4. Point the remote directly at the front panel of the device you want to control. Press SLOW on the remote and wait 5 seconds. The remote is testing a batch of 10 codes on your device.
Did your device turn off?
YES: Go to step 5.
NO: Press SLOW again. The remote tests the next batch of 10 codes. Keep pressing SLOW every 5 seconds until your device turns off.
5. When your device turns off, press the SKIP BACK key on the remote and wait at least 2 seconds. The remote tries the last of the previous ten codes.
Did your device turn on?
YES: Press the OK key. You’re done! You’ve programmed this device key.
NO: Press SKIP BACK again. The remote tests the next code in the batch. Keep pressing SKIP BACK every 2 seconds until your
 device turns back on. When it does, press OK.
Note: If you accidentally press the SKIP BACK key after your device turns on, press the SKIP FWD key. Then, wait two seconds to see if your device turns off again.
CODE LIST FOR BLU RAY PLAYER 
DENON 32258
INSIGNIA 30675, 32428,32596
INTEGRA 31769,32147
JVC 32365
LG 30741
MAGNAVOX 30675
MARANTZ 32414
MICROSOFT 32083
OLEVIA 32331
ONKYO 31769,32147
PANASONIC 31641
PHILIPS 32084,32432
PIONEER 30142,32442
RCA 31769
SAMSUNG 30199
SHARP 32250
SONY 31516
SYLVANIA 30675
TOSHIBA 31769
VIORE 32552
VIZIO 32563
XBOX 32087
YAMAHA 32298